The main contributor to having dry and damaged hair is the occurrence of split ends. It may lead your crowning glory into dull and lifeless stringed-looking strands. Fortunately, there are numbers of ways on how to get rid and prevent those split ends. One of these is trimming, but the question lies behind on how to trim split ends without losing length of the hair.
As we go along, we will share the process on split ends trimming in which the hair length will not compromise. In case, you are concerned with the hair length, we also have here other ways of cutting those split ends.
- 1 How to Trim Split Ends Without Losing Length – Try Hair Dusting
- 2 Other Ways to Trim Split Ends
- 3 Final Thoughts
How to Trim Split Ends Without Losing Length – Try Hair Dusting
One of the best ways on how to trim split ends without losing length of the hair is through the process of hair dusting. But what is actually the difference of hair dusting from hair trimming? Basically, hair dusting is also hair trimming but you should have to cut the tip-most of the hair. Usually, the cutting measures around a quarter-inch and less. After the process, all the cut hair ends will mimic the appearance of dust which, in turn, its term “dusting” comes from.
The method of hair dusting
Generally, you want to know the ways involve in hair dusting as it is a process on how to trim split ends without losing length. Luckily, doing this is very simple and the needed materials are really accessible. Below are the things that you need in order to proceed with the hair dusting process:
- A sharp scissors
- Hairdryer – optional
Initially, it is better to blow-dry the hair as it may offer defined lines. The other option that you may consider is the twisting of the hair into different sections. This step will generally help in identifying the presence of split ends at the tip of the twists.
- Divide your hair into parts that are manageable. You can actually begin with doing four large quarter parts and then along each quarter. Afterwards, dust the hair through each row.
- Using the index and middle finger, basically, clamp each row. Feed the hair into the fingers until reaching the tip-most portion of the hair. It must be around less than an inch remaining.
- Position your hair up facing the natural light. This will actually help you to find any split ends very clear.
- Trim down those hair tips using sharp scissors. You can basically repeat the process in all the sections of the hair.
The benefits of hair dusting
Aside from the fact that hair dusting is one of the processes on how to trim split ends without losing length, it is also a way to maintain the health of the hair. Moreover, hair dusting is highly a preferred process due to the following:
- Support the maintenance of maximum hair length
- Makes the hair looks tidy and free of loose tips
- Aids in the speedy detangling process
- A very quick and easy method to follow
- Applicable for all lengths of hair
How to trim split ends without losing length can be possibly done through hair dusting and it should be practised every 6 to 8 weeks. The reason behind this trimming schedule is to keep the hair healthy and longer. Doing this way on how to trim split ends without losing length is actually a win-win process.
Other Ways to Trim Split Ends
Aside from the way on how to trim split ends without losing length of the hair, there are also some methods on trimming down split ends. However, hair clippings for these split end trimming methods actually measures around an inch or more. In case, you do not mind losing the length of your hair while trimming down those split ends, then you may consider these methods. You could also use shampoo and conditioners for split ends.
Split Ends Trimming #1 – Hair Twisting
Below is the step-by-step process on how to trim split ends through the hair twisting method:
- Brush your hair until dry and divide it into sections with a measurement of about 1 inch.
Drying the hair prior to sectioning it is really beneficial for the easy appearance of the hair split ends. Generally, get about an inch portion of your hair and brush it if it’s tangled. However, keep in mind that the division of hair parts must not be an exact 1 inch.
In case your hair is thin, you can opt for having a bigger section. On the other hand, thicker hair might only need smaller portions of hair. Ideally, you can begin sectioning on one side of the head in order to avoid hair mix-ups.
- Show up the split ends by twisting the hair sections in a very tight motion.
Primarily, begin at the upper portion of the hair and twist it as you go your way down. Continue doing this twisting process until the whole partitions are completely twisted. Twisting the hair also helps in revealing the tips of some hair strands as they popped out from the twist.
- Trim down the stick out split ends from the twisted hair partitions.
You may generally see hair tips that stick out from the twist and lots of them are split ends. Through a cutting shear, trim at least 0.5 centimeters or about 0.20 inches of every single split ends. Doing this may basically show up the healthy hair.
Initially, start cutting off the split ends from the upper part of the hair strand going down of it. This step actually guarantees that no split ends will be missed. In case your hair is in short length, try to cut the split ends in front of the mirror as they are difficult to see over this hair length. However, bear in mind that the outcome of this split ends trimming method is a hair with various lengths.
- Re-twist the hair strand in an opposite direction.
Generally, undoing the initial twist formation may go beyond more split ends. Knowing this, it is better to twist the hair strand in the opposite direction. Typically, the split ends that are unnoticeable in the first twist may be visible this time. Again, through sharp scissors, cut off the split ends that appears.
- Repeat the process.
Once you’re done with the opposite side, it is time to collect new hair partition and then repeat the process of twisting from step 1. Basically, continue doing this process until you completely finish the whole head. Moreover, it is very helpful to use a hair clip to hold the hair portions that are already done trimming.
Split Ends Trimming #2 – Sliding Technique
Another way of trimming split ends but differs with that on how to trim split ends without losing length is the sliding technique. Check the trimming process of this method below:
- Straighten and dry your hair.
Basically, brush the hair thoroughly if your hair is naturally straight. Meanwhile, wavy or curly hair necessitates for brushing and straightening as it may help to pop out the split ends easily. However, wavy hair needs blow-drying instead of straightening. Thus, utilization of a hair straightener also demands the application of a heat protectant. This may be very helpful in avoiding more split ends to come out.
- Pull a section of the hair.
Through this time, part the hair into a section using a small comb. Generally, pull at least an inch of the hair part. Yet, bear in mind that a 1-inch measurement is actually a suggestion; you may do less or more of this depending on your hair thickness.
- Place your hair in the middle of the three fingers.
Basically, brush your hair strand using the index finger, middle finger, and ring finger. This process may only let you notice the hair situated on the top of the middle finger. Do this finger position close to the hair roots so that you can have to slide the fingers through the hair strand.
- Search for popped up split ends when the hair is over the fingers.
Once you brush your three fingers into your hair strands, there will be some hair tips sticking out of the hair partitions. These are actually noticeable in the middle finger area. Check it out and find if there are split ends that require trimming. In case you have a layered hairstyle, check very closely and ensure that the sticking out tips are actually split ends.
- Clip the split ends while sliding the fingers down the hair portions.
Generally, hold the scissors in a perpendicular direction to the hair strand. Doing this will basically allow you to easily snip off the stick out split ends. Gently slide your fingers down the hair strand and clip the split ends as you go along the way. Usually, you only have to clip around 0.13 inch of the hair.
- Repeat the process.
Once you’re done clipping and snipping the split ends, it is time to collect new hair partition and then repeat the process of twisting from step 1. Basically, continue doing this process until you completely finish the whole head. Moreover, it is very helpful to use a hair clip to hold the hair portions that are already done trimming.
Split Ends Trimming #3 – Ends Trimming
The third method is also different from the way on how to trim split ends without losing length of the hair. Below is its step-by-step process:
- Remove hair tangles.
Basically, brush your damp hair using a brush in order to get rid of any tangles. Take note that the brush must have natural bristles or a metal comb. Moreover, it may also be helpful if you run the brush over the water prior to brushing it into your hair. This will actually assist in the proper distribution of water into your hair.
- Make separate hair portions.
After brushing the hair, collect about an inch of the hair and make a portion of it using a small comb. It is actually better to begin on one side of the head to monitor the section that is already done.
- Slip the hair portions into the index and middle finger.
From the upper portion of the hair, place the portion of the hair in between the index and middle finger. Actually, this helps in holding the strands in a tight manner. However, you can also try other fingers if you want. The important thing is that the hair strand is straightly pulled off.
- Slide the fingers down the hair section.
Sliding the fingers gearing towards the bottom may maintain the straightness of the hair section. Moreover, this leads to an accurate view of the hair ends appearance. Once the hair section only has 1 inch remaining, stop sliding your fingers into it.
Pull the hair strands away from the neck and going out in front of you while you are sliding your fingers down. This way, the cutting of the hair strand becomes easier.
- Cut the tips of the hair section.
When you have to cut the hair tip, make sure to do it in a perpendicular direction from the hair strand. The reason for this is to have an even cut of the hair. Cut about 0.4 to 0.8 inches or you can generally go more than that in case the split ends are up to the hair shaft.
- Repeat the process.
Once you’re done cutting the tips of the hair section, it is time to collect new hair partition and then repeat the process of twisting from step 1. Basically, continue doing this process until you completely finish the whole head. Moreover, it is very helpful to use a hair clip to hold the hair portions that are already done trimming. Also, you may need the assistance of someone by doing the back of your head.
Split ends are a common hair problem encountered by most individuals. There are actually factors that affect the fast occurrence of split ends. However, preventing and dealing with it also entails in various ways. Yet, many are still opting for the way on how to trim split ends without losing length of the hair.
Luckily, hair dusting may offer great help in achieving this. Moreover, there are also other methods on how to snip off those split ends but the hair length may be compromised. In case, you want to have an unnoticeable cut of hair strands due to split ends, hair dusting is highly beneficial for you.